10 Setups
348
Setups
10
Unregistered Forms
When a form specified for printing in a form data file (overlay printing) is not present on
the machine, set whether to print the job or not. If you specify [Print], since the specified
form is not present, only the data is printed.
This setting is added to the print settings menu when there is a print specification from
the host computer.
Print ID
When printing by print driver, specify whether to print user authentication information to
the paper for distinguishing the user. Up to top 64 characters can be printed in the user
ID information.
Select from [Top Left], [Top Right], [Bottom Left] and [Bottom Right] for position to print
ID.
Note • To use the ID Print feature, the User ID set by the printer driver is necessary beforehand.
For the configuration procedure, refer to the print driver's online help.
Note • If user ID information cannot be acquired, "Unknown User" is printed.
Banner Sheet
Select whether to output banner sheets to separate different outputs.
The user name and the document name are printed on banner sheets.
Note • Even if the stapler feature is enabled, banner sheets are not stapled.
• On a print job from a Macintosh, the document name does not appear on the banner sheet.
• When printing banner sheets, they are counted for metering purposes.
îš„Off
Do not print banner sheets.
îš„Start Sheet
Print banner sheets before a print job.
îš„End Sheet
Print banner sheets after a print job.
îš„Start Sheet & End sheet
Print banner sheets before and after a print job.
Banner Sheet Tray
Set the paper tray used for banner sheets.
Select from [Tray 1] to [Tray 4].
PostScript Paper Supply
Select whether the PostScript DMS (Deferred Media Selection) feature is enabled or
not.
To Next Page
Loading...
Need help?
General
