12 Machine Status
428
Machine Status
12
îš„HP-GL/2 Stored Programming List
This prints the stored programming settings for HP-GL, HP-GL/2, and HP-RTL
emulation modes.
îš„KS8943 Settings List
This prints the settings in KS5843 emulation modes.
îš„KSSM Settings List
This prints the settings in KSSM emulation modes.
îš„KS8995 Settings List
This prints the settings in KS5895 emulation modes.
îš„Fonts List
This prints a list of the fonts that can be used in the machine.
îš„PostScript Fonts List
This prints the fonts that can be used with PostScript.
Scan Mode Settings
1 Select [Scan Mode Settings].
2 Select the report/list to be printed.
3 Press the <Start> button.
îš„Settings List - Common Items
You can check the hardware configuration of the machine, network information, and
print feature and copy feature settings.
Note • The same content is printed for the [Settings List] regardless of whether you print from [Copy
Mode Settings], [Print Mode Settings] or [Scan Mode Settings].
îš„Extended Features Settings List
You can check the settings relating to scan features.
îš„Domain Filter List
You can check the permitted domains registered for domain filtering.
îš„Job Template List
This prints the settings for the server on which the job template is stored, as set by the
CentreWare Scan Service (optional) scan service setting tool.
To Next Page
Loading...
Need help?
General
