EasyManuals Logo

Fuji Xerox DocuCentre 9000 User Manual

Fuji Xerox DocuCentre 9000
624 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #503 background imageLoading...
Page #503 background image
Error Code
501
Problem Solving
15
016-220
016-221
016-222
016-223
016-224
016-225
016-226
016-227
016-228

[Cause] An error occurred in the document scanner.
[Remedy] Power-cycle the machine. If the document scanner is not
improved by performing the relevant remedy, Contact
our Customer Support Center.
016-450
[Cause] The SMB host name already exists.
[Remedy] Change the host name.
For information about Network Settings, refer to Network Administrator
Guide.
016-454
[Cause] Unable to retrieve IP address from DNS.
[Remedy] Check the DNS configurations and IP address retrieve
method.
For information about Network Settings, refer to Network Administrator
Guide.
016-503
[Cause] Unable to resolve SMTP server name during E-mail
send.
[Remedy] Check that the SMTP server settings from CWIS are
correct. Also, check the DNS server settings.
016-504
[Cause] Unable to resolve POP3 server name during E-mail
send.
[Remedy] Check that the POP3 server settings from CWIS are
correct. Also, check the DNS server settings.
016-505
[Cause] Unable to login to POP3 server during e-mail send.
[Remedy] Check that the user name and password used in the
POP3 server from CWIS are correct.
016-701
[Cause] PCL print data could not be processed as there was
insufficient memory.
[Remedy] Reduce resolution, cancel 2 Sided printing or N up, and
try to print again.
Refer to the print driver's online help.
016-702
[Cause] PCL print data could not be processed as there was
insufficient print page buffer.
[Remedy] Take one of the following actions.
z
Set [Print Mode] to [Speed Priority].
z
Use Ensure Print.
z
Increase the size of the print page buffer.
For information about print modes and print guarantees, refer to the print
driver's online help. For information about memory, refer to "Allocate
Memory" (P.344).
016-703
[Cause] E-mail specifying a non-registered or invalid mailbox No.
was received.
[Remedy] Take one of the following actions.
z
Request the sender to register the mailbox with the
specified number.
z
Request the sender to send to a valid mailbox.
Error Code
Category
Cause and Remedy
CPSMO

Table of Contents

Other manuals for Fuji Xerox DocuCentre 9000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre 9000 and is the answer not in the manual?

Fuji Xerox DocuCentre 9000 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre 9000
CategoryAll in One Printer
LanguageEnglish

Related product manuals