Advanced Copy Settings
109
Copy
5
On
The machine outputs sheets sorted into sets that are arranged in page order. When
document is placed in the document feeder, it automatically turns on (the setting can be
changed to Off manually).
On (Rotate)
The machine outputs sheets sorted into sets that are arranged in page order by alternating
between landscape and portrait orientations.
z
Using the paper size of A4, B5, Letter, or 16K with the document oriented in the same
direction.
Paper Supply
You can set the tray for copying.
1 Select [Paper Supply], and then press the <OK>
button.
2 Select the desired paper tray, and then press the
<OK> button.
Auto
The machine selects the appropriate paper tray
automatically based on the document size.
Tray 1 to Tray 4
Select one of the installed trays.
Note • [Tray 2] to [Tray 4] are displayed when the optional paper trays are mounted.
Tray 5
Select the paper size and paper type.
There are standard sizes and preset sizes (Custom
1 to 5) for the paper size.
For more information on the preset sizes, refer to "Custom Paper
Size Settings" (P.176).
Select [Custom Size] to set a non-standard paper
size. You can set a Y direction (vertical) between
127 and 297 mm (in 1 mm increments), and X
direction (horizontal) between 98 and 432 mm (in
1 mm increments).
Reduce/Enlarge
You can set the copying zoom ratio.
Paper Supply
...
Copy
Auto
Reduce/Enlarge
...
Off
Pages per Side
...
Auto
1
111
Auto
Paper Supply
Qty.
1
Tray 1:A4
Tray 2:A3
Paper Size
...
Tray 5
Qty.
1
Plain 1
Paper Type
...
A3
Y: 127-297mm X: 98-432mm
Custom Size
Qty.
1
210 mm 297 mm
To Next Page
Loading...
Need help?
General
