9 Tools
168
Tools
9
Default Settings
Use the [Default Settings] screen to make default settings for the Copy, Scan, and Fax
features.
For information on how to display the [Default Settings] screen, refer to "System Settings Procedure" (P.162).
Copy
Sets the default advanced copy settings displayed when the control panel's <Copy> button
is pressed.
Paper Supply
Sets the paper tray displayed in [Paper Supply]. Select the default paper tray to use for
copying.
[Auto] is set at the time of factory shipment.
Note • [Tray 2], [Tray 3,] and [Tray 4] are displayed when the optional paper trays are mounted.
• The machine selects a paper tray whose tray is set to [On] for Auto Paper Selection to use for
copying when [Auto] is selected. If there is more than one paper tray available that satisfies the
conditions, the machine selects the tray with the highest priority to use for copying. However, those
trays with the setting of paper quality or paper size that does not support 2 Sided function are
excluded from the selection. The priority of the trays to use is Tray 1 > Tray 2 > Tray 3 > Tray 4 > Tray
5.
• If an optional paper tray is set as default, the default setting returns to [Auto] if that tray is removed.
Reduce/Enlarge
Sets the default value displayed for [Reduce/Enlarge].
You can select [100%], [Auto], [50% A3JA5], [70% A3JA4, B4JB5], [81% B4JA4,
B5JA5], [86% A3JB4, A4JB5], [115% B4JA3, B5JA4], [122% A4JB4, A5JB5],
[141% A4JA3, B5JB4], [200% A5JA3, 5.5 x 8.5"J11 x 17"], or [Preset XXX%].
[Auto] is set at the time of factory shipment.
Note • The value displayed for [Preset XXX%] is the value registered for [Reduce/Enlarge Preset] in [Copy
Settings].
• When [Auto] is set, the machine reduces or enlarges the document to fit the specified paper size
when copying.
2 Sided
Set the default value displayed for [2 Sided].
[1J1 Sided] is set at the time of factory shipment.
îš„ 1 J 1 Sided
Set when copying one-sided document on one side of each output page.
îš„ 1 J 2 Sided
Set when copying one-sided document on both sides of each output page.
îš„ 2 J 1 Sided
Set when copying two-sided document on one side of each output page.
îš„ 2 J 2 Sided
Set when copying two-sided document on both sides of each output page.
To Next Page
Loading...
Need help?
General
