6 Fax
138
Fax
6
Sending Fax Directly from your Computer
This section describes how to send a fax directly from your computer.
After the installation of the print driver, you can directly send the document created on your
computer using an application in the same way as you print from your computer. This
function is called Direct Fax.
For information on how to install the print driver, refer to "Installing the Print Driver/Scan Driver" (P.61).
Note • For information on the Direct Fax function, click [Help] in the print driver screen to display Help
Information.
• In order to use this function, setting the FAX feature to the print driver is required.
For information on how to set the option information, refer to "Setting the Options Configuration" (P.80).
Sending Direct Fax
This section describes how to fax a document directly from your computer.
The procedure used to Direct Fax will vary according to the application you are using. See
your application's manual for the specific procedure.
The steps below are the operation used in the [FX DocuCentre S2420] print driver screen.
Note • You can send a fax up to 250 pages in one transmission. If it exceeds the 250 pages, send it as a
separate file.
1 Select [Print] from the application's [File] menu.
2 Select [FX DocuCentre XXXXX].
XXXXX: Displayed as either "S2420" or "S2220," depending on the model of your machine.
3 Click [Properties], and then select [Fax] from the
[Job Type].
4 Click [Fax] tab, and then select the desired
setting.
Note • For information on the Direct Fax functions,
click [Help] in the print driver screen to display
Help Information.
5 Click [OK].
6 Click [OK] in the [Print] dialog box.
To Next Page
Loading...
Need help?
General
