9 Tools
206
Tools
9
The current passcode is displayed.
Note • To change the passcode, press the <C> (Clear)
button to erase the current passcode, and then
use the numeric keypad to enter a new
passcode.
2 Press the <OK> button.
Copied Impressions
Displays the total number of impressions the user has currently copied.
1 Press [Copied Impressions].
2 Check the value, and then press the <Back>
button.
Copy Limit (Unit: Impressions)
Used to display or set the maximum number of impressions the user is permitted to copy.
1 Press [Copy Limit (Unit: Impressions)].
2 To change the value, use the numeric keypad to
enter the maximum number of permitted
impressions.
Note • You can set a value between 0 and 255 (Unit:
1,000 impressions) for the maximum number of
permitted impressions. Set 0 to disable the
restriction on maximum number of copies.
• The user's current total number of impressions is reset to 0 when the maximum number of
permitted impressions is changed.
3 Press the <OK> button.
Reset Copied Impressions
You can select whether to reset the total number of copied impressions for all registered
users, User01 to User30, at once. Click [Yes] to reset the total number of impressions copied
to 0.
Follow the steps below to perform the operation.
[0001 ]
Login Passcode
User 01
Login Passcode
...
Copied Impressions
...
Copy Limit (Unit: Impressions
...
)
Copied Impressions
352
User 01
Login Passcode
...
Copied Impressions
...
Copy Limit (Unit: Impressions
...
)
Copy Limit (Unit: Impressions)
15 (x 1000)
[0 - 255]
To Next Page
Loading...
Need help?
General
