Paper Jams
283
Problem Solving
13
3 Remove the jammed paper.
Note • If the paper tears, check to make sure there are
no remaining shreds in the machine.
4 Push the tray in gently until it stops.
Paper Jams in Tray 5 (bypass)
Follow the steps below to clear a paper jam in the Tray 5 (bypass).
1 Inspect the inside (around the paper feed
entrance) of the Tray 5 (bypass), and remove the
jammed paper.
Important • If multiple sheets of paper were loaded, remove
all the paper while you clear the jam.
Note • If the paper tears, check to make sure there are
no remaining shreds in the machine.
2 If multiple sheets of paper were loaded, align the corners of the removed paper.
3 Insert the paper with the side to print on facing
down, aligning it so that its leading edge lightly
contacts the paper feed entrance.
To Next Page
Loading...
Need help?
General
