6 Fax
134
Fax
6
2 Select [On], and then press the <OK> button.
Delayed Fax
Used to send a document stored in the machine at a specified time, or issue a command to
a remote machine to send a stored document at a specified time (Delayed Polling). The
number of documents that can be set up simultaneously is 3 for delayed transmission and
1 for Delayed Polling.
Note • You can specify a time between 00:00 and 23:59 (or between 1:00 and 12:59 AM/PM when the 12-
hour clock has been set).
• You cannot specify a date.
• When there is a document set with the time specified for the delayed fax while the machine is off,
the machine sends the document as the machine is turned on.
• If you specify a time before the current time, the fax will be sent at the specified time the next day.
• If the specified time arrives while the document to fax is being scanned, transmission will start about
2 minutes after scanning has finished.
1 Select [Delayed Fax], and then press the <OK>
button.
2 Select [On], and then press the <OK> button.
Note • Select [Off] to disable this function.
3 Use the numeric keypad to enter the time, and
then press the <OK> button.
Off Hook
On
Off
Off Hook
...
Off
ECM
...
On
Delayed Fax
...
Off
Ready to Fax: 0123457890
Delayed Fax
On
...
Off
Delayed Fax
00 : 00
(0:00 - 23:59)