9 Tools
170
Tools
9
îš„ Text
Set when copying document with sharp black and white contrast, such as text document.
îš„ Photo & Text
Set when copying document containing both text and photos.
îš„ Photo
Set when copying photos.
Edge Erase
Sets the default value displayed for [Edge Erase]. Setting a value for this menu item erases
the black shadows created around the edges of the paper when copying with the document
cover open.
You can select values between 0 and 10 mm (in 1 mm increments).
[3 mm] is set at the time of factory shipment.
Scan
Sets the default advanced scan settings displayed when the control panel's <Scan> button
is pressed.
Color Mode
Sets the default color mode used for scanning (the item displayed for [Color Mode]).
[Black & White] is set at the time of factory shipment.
Note • When [Resolution] is set to [400 dpi] or [600 dpi], selecting [Color] changes [Resolution] to [300 dpi].
îš„ Black & White
Scans document as black-and-white documents.
îš„ Color
Scans document as color documents.
File Format (B&W)
Sets the default file format used for scanning in monochrome.
[PDF] is set at the time of factor shipment
îš„ PDF
Saves the scanned document in PDF file format.
îš„ TIFF
Saves the scanned document in TIFF file format.
File Format (Color)
Sets the default file format used for scanning in color.
[PDF] is set at the time of factor shipment.
îš„ PDF
Saves the scanned document in PDF file format.
To Next Page
Loading...
Need help?
General
