Default Settings
171
Tools
9
îš„ JPEG
Saves the scanned document in JPEG file format.
Resolution
Sets the default scan resolution displayed for [Resolution].
You can select [200 dpi], [300 dpi], [400 dpi], or [600 dpi].
[200 dpi] is set at the time of factory shipment.
Note • When the [Color Mode] is set to [Color], you can only select [200 dpi] or [300 dpi].
Original Size
Sets the default value displayed for [Original Size].
You can select [Auto], [A3 (297 x 420mm)], [A4 (297 x 210mm)], [A4 (210 x 297mm)],
[B4 (257 x 364mm)], [B5 (257 x 182mm)], [B5 (182 x 257mm)], [8K (270 x
390mm)], [16K (270x 195mm)], [16K (195 x 270mm)], [A5 (148 x 210mm)], [11 x
17" ], [8.5 x 14" ], [8.5 x 13" ], [8.5 x 11" ], or [8.5 x 11" ].
[A4 (297 x 210mm)] is set at the time of factory shipment.
Original Type
Sets the default value displayed for [Original Type]. This setting optimizes the scanning
characteristics for the specified document type.
[Text] is set at the time of factory shipment.
Note • When [Color Mode] is set to [Color], the image quality of [Text] and [Photo] are equivalent to that of
[Photo & Text].
îš„ Text
Set when scanning document with sharp black and white contrast, such as text document.
îš„ Photo & Text
Set when scanning document containing both text and photos.
îš„ Photo
Set when scanning photos.
Note • This item is disabled when [Color Mode] is set to [Black & White] and enabled when [Color Mode] is
set to [Color].
Lighten/Darken
Sets the default scan density value displayed for [Lighten/Darken].
You can select [Darken +2], [Darken +1], [Normal], [Lighten +1], or [Lighten +2].
[Normal] sets the scan density at about the same as the document; [Darken +2] sets a higher
density than the document; [Lighten +2] sets a lower density.
[Normal] is set at the time of factory shipment.
Fax
Sets the default advanced fax settings displayed when the control panel's <Fax> button is
pressed.
Note • This menu item is not displayed when the Fax Kit is not mounted. When the [Region] item has not
been set in the [Fax Settings], some items are not displayed. Set the [Region] item beforehand.
To Next Page
Loading...
Need help?
General
