9 Tools
172
Tools
9
Resolution
Sets the default fax scan resolution displayed for [Resolution].
[Standard] is set at the time of factory shipment.
Standard
Scans faxes at the resolution of 200 x 100 dpi (7.9 x 3.9 dots/mm).
Fine
Scans faxes at the resolution of 200 x 200 dpi (7.9 x 7.9 dots/mm).
Superfine
Scans faxes at the resolution of 400 x 400 dpi (15.7 x 15.7 dots/mm).
Original Type
Sets the default value displayed for [Original Type]. This setting optimizes the fax scanning
characteristics to the specified document type.
[Text] is set at the time of factory shipment.
Text
Set when faxing document with sharp black and white contrast, such as text document.
Photo & Text
Set when scanning document containing both text and photos.
Photo
Set when scanning photos.
Lighten/Darken
Sets the default fax scanning resolution displayed for [Lighten/Darken].
You can select [Darken +2], [Darken +1], [Normal], [Lighten +1], or [Lighten +2].
[Normal] sets the fax scanning density at about the same as the document; [Darken +2] sets
a higher density than the document; [Lighten +2] sets a lower density.
[Normal] is set at the time of factory shipment.
Original Size
Set the default value displayed for [Original Size].
You can select [Auto], [A3 (297 x 420 mm), [A4 (210 x 297 mm)], [B4 (257 x 364
mm)], [B5 (182 x 257 mm)], [8K (270 x 390 mm)], [A5 (148 x 210 mm)], [11 x 17" ],
[8.5 x 14" ], or [8.5 x 13" ].
[Auto] is set at the time of factory shipment.
Note • [Original Size] is set to [Auto] when a document is placed in the document feeder.
Edge Erase
Sets the default value displayed for [Edge Erase]. Setting a value for this setting erases the
black shadows created around the edges of paper when faxing with the document cover
open.
You can set values between 0 and 10 mm (in 1 mm increments).
[2 mm] is set at the time of factory shipment.
To Next Page
Loading...
