9 Tools
204
Tools
9
Security Settings
System Administrator Passcode
Used to set the passcode for entering System Administration mode.
You can enter between 4 to 6 numbers from 0 to 9.
[11111] (five "1" digits) is set at the time of factory shipment.
Follow the steps below to make the settings.
1 In the [Tools] screen, select [Security Settings],
and then press the <OK> button.
For information on how to display the [Tools] screen, refer to
"System Settings Procedure" (P.162).
2 Select [System Admin. Passcode], and then press
the <OK> button.
3 Enter the desired passcode in the New Passcode
field.
Note • The entered passcode is displayed as asterisks
(*).
4 Press the <OK> button.
System Settings
...
Security Settings
...
Tools
Fax Settings
...
Security Settings
System Admin. Passcode
...
System Admin. Passcode
New Passcode
[* * * * * ]
To Next Page
Loading...
Need help?
General
