2 Environment Settings
48
Environment Settings
2
Important • Double-byte characters cannot be used in CentreWare Internet Services.
[Properties] Tab
Description
îš„ Machine Model
The product name is displayed.
îš„ Serial Number
The product serial number is displayed.
îš„ Machine Name
You can enter the printer name (between 1 and 32 ASCII code characters excluding colons
(:), equal signs (=), at symbols (@), or asterisks (*), which are not valid). (Default: "DocuCentre
S2420" or "DocuCentre S2220")
îš„ Location
You can enter the machine's location (up to 255 ASCII code characters).
îš„ Contact Person
You can enter the contact person's information (up to 255 ASCII code characters).
îš„ Administrator's E-mail Address
You can enter the e-mail address of the system administrator (up to 128 characters).
This information is required for sending an e-mail.
îš„ Comment
You can enter machine comments (up to 255 ASCII code characters).
îš„ Apply button
You can apply changes by pressing this button.
Energy Saver Settings (General Setup)
Note • Neither of Low Power mode or Sleep mode can be disabled.
îš„ Time to Low Power Mode
You can set the time elapse from the last operation until the machine enters Low Power
mode. You can set a value between 1 and 60 minutes. (Default: 1)
îš„ Time to Sleep Mode
You can set the time elapse from Low Power mode until the machine enters Sleep mode. You
can set a value between 1 and 239 minutes. (Default: 1)
îš„ Apply button
You can apply changes by pressing this button.
Export Data P.60
Delete All Names P.60
Tab Menu Item See Page:
To Next Page
Loading...
Need help?
General
