Using CentreWare Internet Services
47
Environment Settings
2
Setting Items on CentreWare Internet Services
The table below lists the menu items on the CentreWare Internet Services screens.
Note • You must have a user name and a passcode to change the settings. The user ID "11111" and the
passcode "x-admin" is set as default. For information on how to change the user ID and the
passcode, refer to "Using CentreWare Internet Services" (P.45) and "System Administrator Settings
(Security)" (P.57).
• You cannot enter System Administration mode from a computer while the machine control panel is
in use, the machine side is in System Administration mode, or there are any current or pending jobs.
If you still cannot enter System Administration mode, wait for 5 minutes and try again since there
may be background process running such as fax job. Also, you cannot operate the machine control
panel while a computer is entering System Administration mode.
Tab Menu Item See Page:
Properties P.48
Description P.48
General Setup -
Energy Saver Settings P.48
Connectivity -
Port Settings P.49
Physical Connections -
Ethernet P.49
Protocols -
TCP/IP P.49
SNMP Configuration P.51
Microsoft Networking P.52
LPD P.53
Port9100 P.53
SMTP Server P.54
HTTP P.54
Services -
Email -
Defaults P.55
Scan -
Job Template P.55
Security -
IP Filtering P.56
System Administrator Settings P.57
Support P.58
Support P.58
Address Book P.58
View All Names P.58
Common Tasks P.59
Management P.60
Import Data P.60