Using CentreWare Internet Services
55
Environment Settings
2
z
Port Number
You can set the port No. used for HTTP communication (a value between 1 and 65535).
You must set a unique number for each port. (Default: 80)
z
Connection Time-Out
Set the connection timeout period from 1 through 255 seconds. (Default: 30)
z
Title
You can select the display for the title displayed on a browser from [None Internet
Services] or [Printer model - IP Address].
îš„ Apply button
You can apply changes by pressing this button.
Note • Reboot the machine to enable new settings.
Defaults (Services > E-mail)
îš„ General
z
Subject (Default: Scan Data from "model name")
You can enter the E-mail header (up to 128 ASCII code characters).
z
Message
You can enter the E-mail body (up to 256 ASCII code characters).
z
Maximum Attached Size (Default: 2MB)
You can set the maximum file size between 2 and 20 MB to attach to an e-mail .
îš„ Apply button
You can apply changes by pressing this button.
Note • Reboot the machine to enable new settings.
Job Template (Services > Scan)
îš„ Network Scanning
z
Color Mode
You can set the color mode from [Black & White] or [Color]. (Default: Black & White)
z
Original Type
You can set the type of document to optimize scan data from [Text], [Photo & Text], or
[Photo]. (Default: Text)
îš„ Advanced Settings
z
Lighten/Darken
You can set the density from five levels. (Default: Normal)
z
Sharpness
You can set the sharpness from five levels. (Default: Normal)
z
Background Suppression
You can check [Enabled] to enable background suppression. (Default: On)
z
Background Suppression Level
You can set the background suppression from five levels. (Default: Normal)
To Next Page
Loading...
Need help?
General
