7 Scan
142
Scan
7
Scanning Procedure
The basic flow of scan operations including placing document in the machine and making
advanced settings is described below.
Placing Document
The following two methods are available to place document:
îš„ Document feeder
z
Single sheet
z
Multiple sheets
Note • The document feeder is not available for some models. An optional component is required. Contact
your local Fuji Xerox representative.
îš„ Document glass
z
Single sheet
z
Bound documents, such as books
Document Feeder
îš„ Supported document sizes
You can place the standard size documents in the document feeder.
When document is placed in the document feeder, the machine detects the document size
automatically. The following standard size documents are detected automatically: A3 ,
B4 , A4 , A4 , B5 , B5 *, A5 , 11 × 17" , 8.5 × 14" *, 8.5 × 13" *, 8.5 × 11" , 8.5
× 11" , 8K , 16K , and 16K *.
Note • You can select one of the following alternative document sizes. For more information, refer to
"Switch Paper Size 1" (P.203) and "Switch Paper Size 2" (P.203).
- B5 (default) or 16K
- 8.5 × 14" (default) or 8.5 × 13""
• When a document containing pages of different sizes is placed in the machine, the machine uses
the largest document size to scan the document.
• When using 2-sided document placed in the document feeder, make sure to set [2 Sided] properly. If
it is not specified and the scanned orientation needs to be corrected, rotate it on your computer.
îš„ Selectable document sizes in the scan driver
A3 (297 × 420 mm), A4 (210 × 297 mm), A5 (148 × 210 mm), B4 (257 × 364 mm), B5 (182
× 257 mm), 8.5 × 11", 8.5 × 14", 11 × 17", 7.25 × 10.5", and Custom.
îš„ Supported documents types (weights)
Documents with weights from 38 to 128 gsm (50 to 128 gsm for 2 Sided documents) can
be placed in the document feeder and scanned.
The document feeder accepts the following number of sheets
Document Type (gsm) Number of Sheets
Lightweight (38 to 49 gsm) 110 sheets
Plain (50 to 80 gsm) 110 sheets
Heavyweight (81 to 128 gsm) 75 sheets