EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre S2220

Fuji Xerox DocuCentre S2220 User Manual

Fuji Xerox DocuCentre S2220
311 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
Scanning Procedure
143
Scan
7
Important • To avoid paper jams, use the document glass for mixed size, folded, wrinkled, cut-and-pasted
documents, curled paper, or carbon-backed paper. If you can flatten the curled document, you can
use the document.
Follow the steps below to place document on the document feeder.
You can place a single or multiple pages of a document.
1 Remove any paper clips or staples from document before placing it in the document
feeder.
2 Place the document in the center of the
document feeder, with the side to be scanned (or
the front surface of a 2 Sided document) facing
up.
3 Align the document guides to each side of the
document.
4 Open the document stopper.
Document Glass
îš„ Document sizes supporting automatic detection
The document size is detected automatically when [Original Size] is set to [Auto].
The following document sizes are detected automatically: A3 , B4 , A4 , A4 , B5 ,
B5 , A5 , 11 × 17" , 8.5 × 11" , 8K , 16K , and 16K .
îš„ Supported document sizes
You can select one of the following document sizes from [Original Size].
A3 , B4 , A4 , A4 , B5 , B5 , A5 , 11 × 17" , 8.5 × 14" , 8.5 × 13" , 8.5 × 11" ,
8.5 × 11" , 8K , and 16K .

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre S2220 and is the answer not in the manual?

Fuji Xerox DocuCentre S2220 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre S2220
CategoryAll in One Printer
LanguageEnglish

Related product manuals