Fuji Xerox DocuCentre S2220 User Manual

Interface Cables
35
Environment Settings
2
1 Press the power switch to the [ ] position to turn
the power OFF.
Note • Make sure that the display is turned off.
2 Connect a network cable to the Ethernet
interface connector.
Note • Prepare a network cable suitable for your
network connection. When you replace the
network cable, contact our Customer Support
Center.
3 Press the power switch to the [ | ] position to turn
the power ON.

Fuji Xerox DocuCentre S2220 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre S2220
Category	All in One Printer
Language	English