3 Product Overview
78
Product Overview
3
The <Log In/Out> button is lit while you are
logged in to the machine.
Note • You do not need to log in to the machine for a
scan job or print job.
To log out, press the <Log In/Out> button again.
Logging in the Machine in Multiple Account Mode
The following procedure describes how to log in to the machine when the machine is in
Multiple Account Mode.
For more information, refer to "User Control" (P.201).
1 Select a user.
2 The passcode input screen appears.
3 Use the numeric keypad to enter the passcode
which corresponds to the account number of the
selected user, and then press the <OK> button.
Note • The passcode is the same as the system
administrator’s passcode used for entering
System Administration mode from the control
panel. For more information, refer to "Enter
System Administration Mode" (P.162).
4 Press the <Start> button to confirm the entered
passcode.
If the entered passcode is correct, the machine
enters Copy Mode.
The <Log In/Out> button is lit while you are
logged in to the machine.
Note • You do not need to log in to the machine for a
scan job or print job.
To log out, press the <Log In/Out> button again.
1
2
45
78
0
User 02
...
User 03
...
Select User
User 01
...
[ ]
Enter Login Passcode
[* * * * * ]
Enter Login Passcode
1
23
456
789
0#
C
1
2
45
78
0
To Next Page
Loading...
Need help?
General
