Fuji Xerox DocuPrint 5105 d User Manual

3.12 Printing Using E-mail - Mail Print - 105
Services >
E-mail >
Defaults >
From
Address > Edit
Receiving
Protocol
Specify the e-mail receiving
protocol.
•SMTP
•POP3*
{ -
Incoming Mail
Print Options
Configure this setting when
printing the e-mail header
and message along with the
document attached to
received e-mail. Specify
[Attachment, Full Headers &
Message] to print the receive
routing of the e-mail, etc.
• Print
Attachment
Only
• Print
Attachment &
Message if it
exists
•Attachment,
Basic Headers
& Message*
•Attachment,
Full Headers
& Message
{{
Print Delivery
Confirmation E-
mail
Specify whether or not
delivery receipt e-mail
should be printed.
• Off*
•On
• Print when
delivery fails
{{
Connectivity >
Protocols >
POP3 Setup
IP Address /
Host Name &
Port
Specify the IP address of the
POP3 server for receiving e-
mail, the IPv6-addr format,
or FQDN (Fully Qualified
Domain Name).
Specify the port number
used by the POP3 server.
Alphanumeric
characters plus
period (.) and
hyphen (-); up to
128 bytes
1 ~ 65535
- {
POP Receive
Password
Encryption
Select the [APOP
Authentication] check box to
use APOP for POP receive
verification.
•Cleared:
Disabled*
• Selected:
Enabled
- {
Login Name Set the login user name for the
POP3 server. Only one user can
be specified.
ASCII graphic
characters (codes
33 to 126); up to
64 bytes
- {
Password Specify the password for the
POP user name, and re-enter
the same password into
[Retype Password].
ASCII printable
characters
(ASCII graphic
characters plus
space; codes 32
to 126); up to
64 bytes
--
Polling Interval Specify the interval for
polling the POP3 server for
mail.
1 to 120
minutes
10 minutes*
- {
Item Setting Description Available
Settings
Receiving Protocol
SMTP POP3

Fuji Xerox DocuPrint 5105 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint 5105 d
Category	All in One Printer
Language	English