Fuji Xerox DocuPrint 5105 d

190 5 Control Panel Settings
[Paper Type]
Printer Settings
Paper Type
Paper Type
Tray 1
Paper Type
Tray 2
Paper Type
Tray 3
Paper Type
Tray 4
Paper Type
Tray 5
Paper Type
Tray 6
Setting Description
Tray 1 to Tray 2 Sets the type of the paper loaded in trays 1 to 2.
• [Plain] (default), [Recycled], [Plain RL], [Heavyweight], [Transparency], [Labels],
[Punched], [Letterhead], [Pre-Printed], [Others], [1. Custom 1] to [5. Custom 5]
Note
• [1. Custom 1] to [5. Custom 5] display the names specified under [Custom Paper
Name].
Tray 3 to Tray 4 Sets the types of the paper loaded in trays 3 to 4.
• [Plain] (default), [Recycled], [Plain RL], [Heavyweight], [Cardstock], [Bond],
[Transparency], [Labels], [Punched], [Letterhead], [Pre-Printed], [Others],
[1. Custom 1] to [5. Custom 5]
Note
• Tray 3 to Tray 4 are optional. The display only shows the trays that are actually
installed on the printer.
• [1. Custom 1] to [5. Custom 5] display the names specified under [Custom Paper
Name].
Tray 5 Sets the type of the paper loaded in the bypass tray.
• [Plain] (default), [Recycled], [Plain RL], [Heavyweight], [Cardstock],
[Transparency], [Labels], [Lightweight], [Punched], [Letterhead], [Pre-Printed],
[Others], [1. Custom 1] to [5. Custom 5]
Note
• [1. Custom 1] to [5. Custom 5] display the names specified under [Custom Paper
Name].
Tray 6 Sets the type of the paper loaded in tray 6.
• [Plain] (default), [Recycled], [Plain RL], [Heavyweight], [Cardstock],
[Transparency], [Labels], [Punched], [Letterhead], [Pre-Printed], [Other],
[1. Custom 1] to [5. Custom 5]
Note
• Tray 6 is optional. The display only shows the tray that is actually installed on the
printer.
• [1. Custom 1] to [5. Custom 5] display the names specified under [Custom Paper
Name].