Safety Notes 15
Machine Installation
Do not locate this product where people
might step on or trip over the power cord.
Friction or excessive pressure may generate
heat and eventually cause electric shock or a
fire accident.
Never locate this product in the following
places:
• Near radiators or any other heat sources
• Near volatile flammable materials such as
curtains
• In the hot, humid, dusty or poorly
ventilated environment
• In the place receiving direct sunlight
• Near cookers or humidifiers
Locate this product on a level and sturdy
surface that can withstand a weight of 244
Kg. Otherwise, if tilted, the product may fall
over and cause injuries.
Locate this product in a well-ventilated area.
Do not obstruct ventilation openings of the
product.
Keep the minimum clearance as follows for
ventilation and an access to the power plug.
Unplug the product if an abnormal condition
is noted.
Do not incline the product at more than 10
degree angle. Otherwise, it may fall over and
cause injuries.
Always lock the wheels of this product after
installation. Otherwise, it may fall over or slide
and cause injuries.
To bundle wires and cables, always use the
cable ties and spiral tubes that Fuji Xerox
supplies. Otherwise, it may cause some
defects.
(Unit：mm)
971
1569
70
662
407
100
100 400
1141
Back
10
°
Front
Left
Right
Front
Back
10
°
10
°
10
°
Left
Right
To Next Page
Loading...
Need help?
General
