386 A Appendix
A.8 Installing the Korean Additional Fonts Kit
This section describes how to install the Korean Additional Fonts Kit on the printer.
Installation Procedure
1. Press the printer's power switch to turn off the
power.
Note
• Make sure that there is no indication on the display, and
<Power Saver> button is off.
2. Open the front cover.
3. Press the < > side of the printer's main
power switch to turn off the main power and
close the front cover.
Note
• The <Main Power> lamp goes out on the control panel.
4. Unplug the power cord from the power outlet
and the printer.
Korean Additional Fonts Kit
To Next Page
Loading...
Need help?
General
