2.1 Main Components and Functions 53
Control Panel
No. Name Description
1 <Log In/Out> lamp Lights when authenticating the card that is inserted in the Embedded IC Card
Reader (optional) or the connected IC Card Reader for relative devices.
2 <Ready> lamp Lights when the printer is ready to print.
3 <Error> lamp Blinks or lights when an error occurs.
4 <Main Power> lamp Lights when the main power of the printer is switched on.
5 Display Displays the status of the printer, menu options, and messages.
[Please Wait...] is displayed when the printer power is switched on. Print job is
available when the display message changes to [Ready to print].
It displays authenticated user ID for about 2 seconds when card authentication is
used.
Nothing will be displayed during Power Saver Mode even if the printer power is
switched on.
Refer to
• "Control Panel Display" (P. 55)
6
<P
ow
er Sav
er> button
The button li
ghts while th
e printer is
in P
ower Sav
er mode.
The printer exits Power Saver mode by pressing this button.
The printer enters Power Saver mode (Low Power mode) by pressing this button
during Stand-by state.
Note
•
<Pow
er Sav
er> button may be kept lit f
or sev
eral t
ens of seconds if the printer is
switched off during Power Saver mode.
To Next Page
Loading...
Need help?
General
