52 2 Basic Operation
Note
• The HDD Extension Kit (optional) is required when installing the finisher.
• The C3 Finisher and the C3 Finisher with Booklet Maker are optional. In some sections of this guide, they are
referred to as "finisher".
12 Finisher transport center tray (Top
cover of the finisher transport)
Prints are delivered here when they are unable to be delivered to the output
tray or finisher tray. Pull the cover upward when clearing paper jams.
Note
• Remove outputs delivered to the tray constantly.
No. Name Description
To Next Page
Loading...
