7.9 Security Features 337
Using the Audit Log
The Audit Log makes it possible to track when, by whom, and what type of operations were
performed on the printer. The Audit Log lets you monitor printer operations to detect
unauthorized use or attempted unauthorized use.
Important
• Fuji Xerox shall not be held liable for any damages due to use or inability to use the Audit Log feature.
Note
• Up to 50 entries are maintained in the log. When an HDD Extension Kit (optional) is installed, up to 15,000 entries
can maintained in the log. When the maximum number of log entries is reached, each new entry causes the
oldest entry to be deleted.
• The HTTPS setting must be configured in order to output the Audit Log. For details about the setting procedure,
refer to "Configuring HTTP Communication Encryption Settings" (P. 342) or the online help for CentreWare
Internet Services.
Enabling the Audit Log
In order to use the Audit Log, you first need to use the following procedure to enable it.
1. Launch your web browser and access CentreWare Internet Services.
Note
• If you do not know how to access CentreWare Internet Services, refer to "1.6 Configuring the Printer Using
CentreWare Internet Services" (P. 42).
• If you are prompted to enter the administrator's ID and password, enter them and click [OK].
2. Click the [Properties] tab.
3. On the menu on the left, click [Security] > [Audit Log].
The [Audit Log] screen is displayed.
4. Select the [Enabled] check box for [Audit Log] under [Enabling Audit Log on machine] and
then click [Apply].
To Next Page
Loading...
Need help?
General
