5.2 Common Menus Setting 171
[Print Area]
[Banner Settings]
System Settings
Print Area
Setting Description
Print Area Sets whether or not to extend the print area. This item is enabled when printing by
emulation (HP-GL/2, ESC/P, PCL) or in PostScript.
• [Standard] (default)
•[Extended]
System Settings
Banner Settings
Banner Settings
Banner Sheet
Banner Settings
Banner Tray
Banner Settings
Driver Settings
Setting Description
Banner Sheet Sets whether or not to insert banner sheets.
• [Off] (default)
Does not output banner sheets.
• [Start Sheet]
Outputs a banner sheet at the beginning of a document.
•[End Sheet]
Outputs a banner sheet at the end of a document.
•[Start & End]
Outputs banner sheets at the beginning and end of a document.
Banner Tray Sets the paper tray to be used for printing banner sheets.
•[Tray 1] (default)
• [Tray 2] to [Tray 4], [Tray 6]
Note
• Tray 3, Tray 4, and Tray 6 are optional. The display only shows the trays that are
actually installed on the printer.
Driver Settings Sets whether or not to enable banner settings for the print drivers.
•[Enabled] (default)
•[Disabled]
To Next Page
Loading...
