360 7 Maintenance
7.14 Moving the Printer
Use the following procedure when moving the printer.
Note
• When Two Tray Module (optional) or Tandem Tray Module (optional) is installed, you can move the printer using
the casters.
Important
• Always lock the casters after moving the printer.
1. Turn off the printer’s power switch and the main power switch.
2. Unplug the power cord, interface cable, and all the other cables from the printer.
3. Pull out the trays from the printer, and remove any paper in them. Re-wrap the paper and
store it away from dust and humidity.
4. Push the trays all the way back into the printer.
5. Lift the printer and carefully move it. If moving over a long distance, pack the printer in a
box.
Important
• This product weighs about 58 Kg. When moving it, always carry it by a team of four persons.
Note
• It is not needed to remove the consumables such as toner cartridges when moving the printer.
To Next Page
Loading...
