298 7 Maintenance
Replacement Procedure
1. After confirming that the printer is not
performing any operation, open the front
cover.
2. Hold the lower part of the toner cartridge and
gently slide out the cartridge.
3. Hold the handle on the top of the cartridge,
and pull it out from the printer.
Important
• Slide out the toner cartridge gently. Otherwise, toner may
spill from the cartridge.
4. Unpack the new toner cartridge and shake it
five or six times to distribute the toner evenly.
5. Insert the toner cartridge in gently until it
stops.
6. Close the front cover.
Note
• If the front cover is not completely closed, a message will
appear and the machine remain paused.
To Next Page
Loading...
