A.9 Notes and Restrictions 397
• In the following cases, settings on the [Properties] tab of CentreWare Internet Services may
not be imported.
• When the configuration (options) of the original printer and the printer you are importing
into are different.
• When the port used for import is set to [Disabled].
• Note the following when allocating fixed IP addresses to the original printer.
• You cannot copy IP addresses.
• When the originally allocated IP address is fixed, check whether the ports are enabled or
disabled as desired while setting the correct IP address on the printer's control panel after
the settings are copied.
When using an undefined IP address, settings that use TCP/IP are automatically disabled.
Notes and Restrictions on Security Features
Encrypted Communication
Encrypting HTTP communication enables you to encrypt communication data for IPP printing
(SSL encrypted communication). The data is encrypted only on the network, but send data itself
is not encrypted.
Image Log Control
• The Image Log Control feature is processed on a priority basis depending on the document
image of a job, the data size, the processing of multiple jobs other than the Image Log Control
feature, the [Assurance Level] setting, or the [Transfer Image Log] > [Assurance Level] setting.
• The Image Log Control feature is designed to supplement the security feature for documents;
therefore, creating image logs or job processing other than the feature may take long.
• From a security perspective, the machine cannot abort (forcibly terminate) image log creation
to give priority to store data.
• Searching for images and print job logs allows the system administrator to grasp the
identification information of the user who instructed the job. Note that Fuji Xerox is not
responsible for a privacy issue of the user caused by using the Image Log Control feature.
• In the event of forced power failure such as a blackout or a hard disk failure, it is not
guaranteed the image logs are securely created and/or transferred.
• Only the jobs performed after the start of the Image Log Control feature will be covered by the
Image Log Control feature.
IP Filtering IPv4 Filtering
IPv6 Filtering
Watermark Watermark
Accounting Accounting management
Accounting information settings
Audit Log Audit Log
IC Card Setting General Setting
Feature Category