3.13 Printing Using Google Cloud Print 113
6. Click [OK] in the confirmation screen. The machine will reboot, and the settings will be
reflected.
îš„ Registering the Device to Google Cloud Print ver 1.1
1. After the machine reboots, reload the web browser.
2. Click the [Properties] tab > [Connectivity] > [Protocols] > [Google Cloud Print], and click
[Register This Device to Google Cloud Print].
3. Confirm that the message changes from [Not Registered] to [Registering], and a
registration paper is printed from your machine.
You will need this registration paper in the following steps.
Note
• Message [Registering] will change to [Registered] when the registration is finished in step 6.
• Finish step 6 within 14 minutes after [Registering] is displayed.
4. Enter the web address on the registration paper to the address box of the browser, and
press the <Enter> key.
5. Enter the Google account and passcode of the user using this feature, and log in.
6. Click [Finish printer registration].
7. Registering to Google Cloud Print is finished.
Click [Manage your printers].
8. Confirm that your machine is in the list.
When the registration is done, you can print from your machine by logging in to the
owner's account.
Note
• If the registration failed, go back to step 2 and click [Register This Device to Google Cloud Print] again to re-print
the registration paper.
• Sharing settings are needed to use the machine with non-owner accounts. For more information on sharing
settings, refer to "Sharing a Device between Multiple Users"(P.114).
Checking the Device Registration Status
You can check if your machine is registered to Google Cloud Print, with CentreWare Internet
Services.
1. Start a web browser from a network connected computer.
2. Enter the machine's IP address into the address box on the browser, and then press the
To Next Page
Loading...
Need help?
General
