118 4 Paper
4Paper
4.1 About Paper
Using paper that is not appropriate for the printer can cause paper jams, image quality problems,
or printer failure. Use only paper that is appropriate for the printer.
WARNING
• Do not use conductive paper such as origami paper, carbonic paper or conductively-coated
paper. When paper jam occurs, it may cause short-circuit and eventually a fire accident.
Loadable Quantity and Weight for Supported Paper
Standard Paper
The following table lists the supported paper sizes and paper types, and the capacity of each
paper tray.
Note
• G.S.M. (gram per square meter) refers to a weight in grams of one square meter of paper.
Important
• Be sure to load paper that meets the above requirements in each paper tray. Also be sure to select the correct
paper sizes, paper types, and paper trays when sending print requests from your print driver.
Loading paper that is not supported or configuring wrong settings can cause paper jams.
• Moisture, such as water, rain, and humidity can cause print images to come off from paper. For more information,
contact our Customer Support Center or your dealers.
Note
• Ream weight is the weight of 1,000 sheets of duodecimo size (788 x 1,091 mm) paper.
Paper Tray Basis Weight/Ream Weight
Maximum Capacity
*
Tray 5 (Bypass tray) 60 to 216 gsm
Ream Weight: 52 - 186 kg
Up to 10 mm
95 sheets
Tray 1 (Standard) 60 to 105 gsm
Ream Weight: 52 - 90 kg
Up to 54 mm
500 sheets
Tray 2 (Standard) 60 to 216 gsm
Ream Weight: 52 - 186 kg
Up to 54 mm
500 sheets
Trays 3 and 4
(Two Tray Module) (optional)
60 to 216 gsm
Ream Weight: 52 - 186 kg
Up to 54 mm
500 sheets
Trays 3 and 4
(Tandem Tray Module)
(optional)
60 to 216 gsm
Ream Weight: 52 - 186 kg
Tray 3: Up to 92 mm, 870 sheets
Tray 4: Up to 121 mm, 1130 sheets
Tray 6 (HCF)
(optional)
56 to 216 gsm
Ream Weight: 48 - 186 kg
2000 sheets
*
:When using 80 gsm paper
To Next Page
Loading...
Need help?
General
