7.8 Enabling a RAM Disk 325
7.8 Enabling a RAM Disk
The following describes how to enable a RAM Disk.
If you enable a RAM Disk, Sample Set/Secure Print/Private Charge Print/Charge Print/Delayed
Print can be used without installing the
HDD Extension Kit
(optional).
Important
• When using a RAM Disk, if you turned on and off the machine, all the stored documents will be removed.
Note
• When printing a large amount of data using a RAM Disk, the data to be transferred is divided.
1. Press the <Settings> button on the control
panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
3. Press the < > or <OK> button to select.
[Network/Port] is displayed.
4. Press the < > button until [System Settings]
is displayed.
5. Press the < > or <OK> button to select.
[Audio Tones] is displayed.
6. Press the < > button until [RAM Disk] is
displayed.
7. Press the < > or <OK> button to select.
8. Press the < > button.
9. Press the <OK> button.
Setting on the Print Driver’s Property (Computer Side)
The following setting is required on the print driver’s property page. You need to specify the
[RAM Disk] to [Installed]. This explains the case when using Windows 7 as an example.
Admin Menu
System Settings
System Settings
Audio Tones
To Next Page
Loading...
