372 A Appendix
A.2 Options
The following table lists the main accessories available for the printer. To purchase them, contact
the dealer where you purchased the printer.
Product Name Product Code Description
HDD Extension Kit E3300197 For functions that require
HDD Extension Kit (optional)
, refer to
"A.5 Installing the HDD Extension Kit" (P. 376).
Two Tray Module EL200969 Two paper trays for loading up to 500 sheets of plain paper
(When using 80 gsm paper). Installs directly under the printer
unit.
Tandem Tray Module EL200970 Consists of three trays. Tray 3 can load 870 sheets of paper and
Tray 4 can load 1,130 sheets of paper (when using 80 gsm
paper).
HCF B1 QC100123 A tray that can load 2,000 sheets of paper (When using 80 gsm
paper).
Exit 2 Tray E3300198 Allows you to use the center output tray as two separate trays.
C3 Finisher QD200084 Staples output sheets.
C3 Finisher with Booklet Maker QD200085 Staples or hole-punches output sheets. Also folds output sheets
in half or staples them.
The HDD Extension Kit (optional) is required.
2/4 Hole Punch Kit for C3 Finisher EC102445 2/4 hole-punches output sheets.
US 2/3 Hole Punch Kit for C3 Finisher EC102446 2/3 hole-punches output sheets.
Transport Unit H2 for C3 Finisher QL200091 Transfers paper output from the center tray to the C3 Finisher or
C3 Finisher with Booklet Maker.
Note
• This unit is available when the C3 Finisher or C3 Finisher with
Booklet Maker (optional) is installed.
Folder Unit CD1 QC100122 Allows you to fold in z-folded or tri-folded output.
Note
• This unit is available when the C3 Finisher or C3 Finisher with
Booklet Maker (optional) is installed.
65 Sheets Staple Unit for C3 Finisher EC102678 Staples output sheets. Up to 65 sheets can be stapled
depending on the type of paper.
Note
• This unit is available when the C3 Finisher or C3 Finisher with
Booklet Maker (optional) is installed.
Parallel Port Kit EC102449 Required to use the parallel interface.
Secondary Ethernet Kit EL201151 Required to use two lines on the Ethernet interface.
Multi Language Font Kit EC101145
A UniCode
TM
font kit which supports the PCL language for
principal systems like SAP.
Note
•UniCode
TM
is a character code advocated by Xerox to handle
multiple languages such as Chinese, Korean, Japanese, and
English in one character code.
KR Additional Font Kit E3300201 Supports Korean fonts
TC/SC Additional Fonts Kit E3300202 Supports Chinese fonts.
To Next Page
Loading...
Need help?
General
