5.1 Overview of the Common Menus 145
Setting Example: Changing the Sleep Mode Timer
In this example, we will set the Sleep Mode Timer for operations in common menus to 60
minutes.
1. Press the <Settings> button on the control
panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
Note
• If you went past the desired item, return to the item by
pressing the < > button.
3. Press the < > or <OK> button to select.
Move on to the next lower level.
Note
• If you pressed the < > or <OK> button on the wrong item,
return to the previous screen by pressing the < > or the
<Back> button.
• To start over from the beginning, press the <Settings>
button.
4. Press the < > button until [System Settings]
is displayed.
5. Press the < > or <OK> button to select.
Move on to the next lower level.
6. Press the < > button until [Sleep Mode
Timer] is displayed.
7. Press the < > or <OK> button to select.
The current set value is displayed.
8. Press the < > or < > button to display [60
Minutes Later].
Note
• Holding down the < > or < > button scrolls through the
options in a circular fashion.
9. Press the <OK> button to confirm your
selection.
The value is accepted.
Admin Menu
System Settings
System Settings
Audio Tone
s
System Settings
Sleep Mode Timer
Sleep Mode Timer
•
1 Minutes Later
Sleep Mode Timer
60 Minutes Later
Sleep Mode Timer
•
60 Minutes Later
To Next Page
Loading...
