5.2 Common Menus Setting 175
[Drum Life End]
*: The page yield of each consumable varies depending on print requests, documents printed, how often the power
is switched on/off or temperature and humidity of the environment where the printer is located. For more
information, refer to "A.3 Life of Consumables and Regular Replacement Parts" (P. 374).
[mm / inches]
System Settings
Drum Life End
Setting Description
Drum Life End A message indicating that the replacement life of a drum cartridge is approaching
appears approximately 7,500 pages* before the replacement life of the drum
cartridge is reached. Approximately 2,300 pages* before the replacement life is
reached, a message indicating the drum cartridge needs to be replaced soon
appears. Select whether or not to cancel printing when the drum cartridge has
reached its replacement cycle.
Select whether or not to cancel printing when a drum cartridge has reached its
replacement cycle.
• [Cancel Printing] (default)
After the drum cartridge replacement message appears, printing is disabled until
the drum cartridge is replaced with a new one.
• [Continue to Print]
Even if a drum cartridge replacement life is reached, printing is not disabled
immediately. Printing will be forcibly canceled to protect the printer at the point
when abnormality is detected in the drum cartridge.
Note, however, that printer performance such as print quality might be
deteriorated when printing is continued beyond the replacement cycle of a drum
cartridge. We recommend users to prepare new drum cartridge for immediate
replacement, as printing might be stopped soon.
System Settings
mm / inches
Setting Description
mm / inches Sets the unit of measure for lengths displayed or entered on the control panel.
• [Millimeter(mm)] (default)
•[Inches (")]
To Next Page
Loading...
Need help?
General
