192 5 Control Panel Settings
[PaperTypePriority]
Printer Settings
PaperTypePriority
PaperTypePriority
Plain
PaperTypePriority
Plain RL
PaperTypePriority
Recycled
PaperTypePriority
1. Custom 1
PaperTypePriority
2. Custom 2
PaperTypePriority
3. Custom 3
PaperTypePriority
4. Custom 4
PaperTypePriority
5. Custom 5
Setting Description
Plain, Plain RL,
Recycled,
1. Custom 1 to
5. Custom 5
This setting will be used by the Auto Tray Selection feature. Defaults are as follows:
Plain=[1], Recycled=[2]. Otherwise, the default is [Auto Paper Off].
•[1] to [9]
Sets the priority order of paper types.
• [Auto Paper Off]
Does not set the priority order of paper types. In this case, the Auto Tray
Selection feature is not used.
Note
• [1. Custom 1] to [5. Custom 5] display the names specified under [Custom Paper
Name].
• You can assign the same priority order to different paper types. In this case, the
printer selects a tray based on the [Paper Tray Priority] setting.
To Next Page
Loading...
Need help?
General
