208 5 Control Panel Settings
[Init/Delete Data]
The [Init/Delete Data] menu allows you to initialize printer settings stored in NV memory,
network ports, and the hard disk, and delete data such as forms registered on the printer.
Note
• Executing initialization returns the settings to their default values.
*1
: [Secure Print Jobs] appears when using Secure Print feature while [Pte ChargePrint Jobs] appears
when using Private Charge Print.
Admin Menu
Init/Delete Data
Init/Delete Data
NVM
Init/Delete Data
Hard Disk
Init/Delete Data
Initialize Cert
Init/Delete Data
Delete All Data
Init/Delete Data
Print Meter
Init/Delete Data
Job Counters
Init/Delete Data
DeleteForm/Macro
Init/Delete Data
Delete Font
Init/Delete Data
Secure Print Jobs
*1
Setting Description
NVM Initializes the NV memory. All settings return to the defaults when NV memory is
initialized.
Note
• The NV memory is nonvolatile memory that retains the printer settings even
when its power is switched off.
Hard Disk Initializes the hard disk.
The following data on the hard disk is deleted by initialization: additional fonts,
ESC/P, HP-GL, HP-GL/2, and PCL forms.
Note
• Stored documents and log data of Secure Print, Sample Set and Delayed Print are
not deleted.
• This item appears only when HDD Extension Kit (optional) is installed.
Initialize Cert Deletes all certificates and initializes data.
Use this option only when the certificate registered is damaged.
To Next Page
Loading...
Need help?
General
