214 5 Control Panel Settings
2 Sided Printing Sets whether to enable 2-sided printing.
• [Off] (default)
Disables 2-sided printing.
• [Long Edge Flip]
Prints on both sides of the paper so that the finished document opens like a book.
• [Short Edge Flip]
Prints on both sides of the paper so that the finished document opens like a
calendar.
Print Mode Sets the print mode to one of the following:
•[High Speed]
Prints documents at a higher speed than [Normal].
• [Normal] (default)
Prints documents at standard speed with standard image quality.
•[High Quality]
Produces higher image quality than [Normal], but at a lower print speed.
Password Before printing a password-locked DocuWorks files, set the password here.
DocuWorks files will be printed only if its password matches the password you set
here.
The password can be up to 32 alphanumeric characters long.
(See *4 on P. 215.)
Collated Sets whether to collate multiple-set documents. (1, 2, 3...1, 2, 3...)
• [Off] (default)
•[On]
Layout Sets the output layout.
•[Auto %] (default)
Automatically selects the output size and calculates the zoom ratio to print the
file as large as possible on the output paper.
• [100% (No Zoom)]
Prints your DocuWorks file in its original size regardless of the output size.
•[2 Pages Up]
Prints two pages onto one sheet of paper. When this is selected, the output size
will be A4 or 8.5 x 11” depending on the option selected under [Admin Menu] >
[Printer Settings] > [DefaultPaperSize].
•[4 Pages Up]
Prints four pages onto one sheet of paper. When this is selected, the output size
will be A4 or 8.5 x 11” depending on the option selected under [Admin Menu] >
[Printer Settings] > [DefaultPaperSize].
Note
• For [Auto %], [2 Pages Up] or [4 Pages Up], the zoom ratio will be calculated
based on the document size excluding sticky notes.
Output Size Sets the output paper size.
•[Auto] (default)
Automatically determines the output size based on the size and settings of your
DocuWorks file.
• [A4] or [8.5 x 11
"
]
Displays either [A4] or [8.5 x 11
"
] depending on the option selected under [Admin
Menu] > [Printer Settings] > [DefaultPaperSize].
Setting Description