230 6 Troubleshooting
Paper Jams at the Handle 3c
1. If you can see the edge of the jammed paper
on the output tray, gently pull the paper
straight from the exit area to remove.
2. Open the finisher front cover.
3. Move the handle 3c to the left.
4. Remove the jammed paper.
Note
• If paper is torn, check for any torn pieces of paper inside
the machine.
5. Return the handle 3c to its original position.
6. Close the finisher front door.
Note
• If the finisher front door is not completely closed, a
message will appear and the machine remains paused.
To Next Page
Loading...
Need help?
General
