318 7 Maintenance
8. Press the < > button to display [IP Address].
. 9. Press the < > or <OK> button to select.
The current IP address is displayed.
10. Enter the value in the first field using the < >
or < > button (Example: 192), and press the
< > button.
Note
• If you do not need to change the setting, press the < >
button to advance to the next field.
• Pressing the < > or < > button longer increments the
value by 10.
• To return to the previous field, press the < > button.
11. Enter the rest of the fields in the same
manner. After entering the last (4th) field
(Example: 192.0.2.1), press the <OK> button
to confirm your entry.
12. If you want to change a subnet mask and
gateway address, press the <Back> button
and proceed to Step 14.
If you want to finish configuring the settings,
proceed to Step 21.
To change the Subnet Mask/Gateway Address
13. Press the < > button until [Subnet Mask] is
displayed.
14. Press the < > or <OK> button to select.
The current subnet mask is displayed.
15. Enter the subnet mask in the same way you
entered the IP address (Example:
255.255.255.000), and press the <OK> button
to confirm your entry.
16. Press the <Back> button to return to [Subnet
Mask].
17. Press the < > button to display [Gateway
Address].
IP Address
•
000.000.000.000
IP Address
192.000.000.000
IP Address
•
192.000.002.001
IPv4 Settings
Subnet Mask
Subnet Mask
•
000.000.000.000
Subnet Mask
•
255.255.255.000
IPv4 Settings
Subnet Mask
IPv4 Settings
Gateway Address
To Next Page
Loading...
