7.9 Security Features 333
5. After all the settings are completed, click [Apply].
Force Print If [Allow Device Settings to Override] is set, instruction from the client to
perform Watermark or Secure Watermark features will be ignored, when [On]
is specified in [Client Print] in the printer. You need TrustMarkingBasic
(purchase separately) to instruct from the client to perform Watermark or
Secure Watermark features.
• [Allow Device Settings to Override]
• [Allow Client Settings to Override]
Note
• The setting method applies to both the Watermark and Secure Watermark
features.
Report Specifies whether or not a hidden text string is automatically printed when
printing a list/report.
•[Off]
•[On]
Protection Code Specifies whether secure watermark job execution protection is on or off.
Specifying [Prevent Duplication] embeds a digital code.
•[Off]
• [Prevent Duplication]
Default Secure Watermark Specifies the character string embedded for hidden string printing.
•[Off]
• [Copy Prohibited]
• [Copy]
•[Duplicate]
•[Custom Secure Watermark 1 - 3]
Note
• To specify your own character string, click [Create Watermark] and then
enter the string you want into the dialog box that appears. Next, click
[Apply].
Background Pattern Specifies the background pattern to be used for hidden printing.
• [Wave], [Circle], [Stripe], [Chain], [Beam], [Rhombic], [Sunflower], [Fan]
Secure Watermark /
Background Contrast
Specifies the contrast between the text and background for the watermark.
Contrast can be set as a value from 1 to 9.
Note
• Watermark/background contrast can be checked by printing the [Secure
Watermark Sample List].
Setting Description
To Next Page
Loading...
