7.10 Configuring Encryption Settings 343
5. On the Screen that appears, select [Self-Signed Certificate] and then click the [Continue]
button.
6. On the screen that appears, set [Public Key Size] and configure the [Issuer] and [Days of
Validity] setting, and then click the [Apply] button.
Note
• If you do not want to apply your new settings and want to reset them to the original values, click [Undo].
7. After updating the settings, refresh the web browser.
8. From the menu on the [Properties] tab, click [Security] > [SSL/TLS Settings].
To Next Page
Loading...
