362 A Appendix
Paper Size Tray 5 (bypass tray):
A3, B4, A4, A4 , B5, B5 , A5, A5 , B6 ,
Custom Paper (Width: 89 - 297 mm, Length: 98 - 432 mm)
Tray 1 - 2 (standard):
A3, B4, A4, A4 , B5, B5 , A5,
Custom Paper (Width: 140 - 297 mm, Length: 182 - 432 mm)
Two Tray Module (optional):
A3, B4, A4, A4 , B5, B5 , A5,
Custom Paper (Width: 140 - 297 mm, Length: 182 - 432 mm)
Tandem Tray Module (optional):
A4 , B5
High Capacity Feeder (optional):
A4 , B5
2 Sided Printing:
A3, B4, A4, A4 , B5, B5 , A5, A5 , B6,
Custom Paper (Width: 128 - 297 mm, Length: 182 - 432 mm)
Image loss width: Top edge, 4 mm or less; bottom edge, 4 mm or less;
left and right edges, 4 mm or less
Paper Type Bypass Tray:
60 - 216 gsm
Tray 1 (standard):
60 - 105 gsm
Tray 2 (standard)
60 - 216 gsm
Two Tray Module (optional):
60 - 216 gsm
High Capacity Feeder (optional):
56 - 216 gsm
Tandem Tray Module (optional):
60 - 216 gsm
Important
• Use only the recommended paper. Using paper other than that
recommended for the printer can cause printing problems. Do not use
special ink jet paper.
• Note that poor printing quality due to paper-related printing
problems can occur when using the printer in an environment that is
dry, cold, or very humid.
• Printing over the printed side or on the reverse side of paper that
already has been printed on can result in poor print quality.
• When printing on envelopes, use envelopes that do not have adhesive
applied.
• The type of paper being used and environmental conditions can
affect printing quality. Because of this, it is recommended that you
test print and confirm proper print quality before using the printer.
• For information about the recommended paper, contact our
Customer Support Center or your dealer.
Items Description
To Next Page
Loading...
Need help?
General
