U41117-J-Z125-7-76 101
Operating and monitoring CentricStor Starting GXCC
5.3.4.4 Additional password query
If GXCC or XTCC requires a password to transfer an update (see the section “Software up-
dates” on page 118) or manual (see the section “Online Manual” on page 235), the follow-
ing window appears:
This password query is made only when the user can access the system without a primary
password query.
Information on this is provided in the sections “Optional access control for Observe
mode” on page 99 and “Suppressing the password query” on page 100.
The window consists of an input field for the password and the following buttons:
OK
The password entered is used if it is not empty. Its validity is not verified: the transfer
fails if the password is invalid.
Unknown
When you click on this button you exit the window. The update or manual is not accept-
ed.
Help
Displays a help text.
NOTES
● Depending on the context, the term “XTCC” can be replaced by “GXCC” in the window
displayed above. The user ID can be different.
● In Observe mode the password of the user ID “xtccuser” is requested.
● If an update from an earlier connection which has not yet been activated is already
available locally, this is indicated by the message Update <m.n> available.
i
To Next Page
Loading...
Need help?
General