340 U41117-J-Z125-7-76
Function bar XTCC
OK
Confirms the settings and closes the menu.
Help
Opens a window containing the XTCC help file.
Cancel
Cancels the settings and closes the menu.
8.3.4.4 Scan Now
Triggers an additional, immediate scan cycle in the event of an Autoscan process being
stopped manually or a lengthy Autoscan delay. This function can also be initiated by
pressing CTRL + spacebar simultaneously.
8.3.4.5 Interaction Timeout
XTCC stops the periodic Autoscan process if no user interactions are registered for an hour.
The following are counted as user interactions:
– Moving the mouse cursor over the configuration display or the Groups window
– Iconizing, maximizing, shifting or altering the size of one of these windows
After the timeout has occurred the following dialog box is displayed:
Meaning of the buttons
Resume Autoscan
The periodic Autoscan process is started again and the time window for one hour is re-
started.
Remain stopped
The Autoscan stop status is retained.
Exit XTCC
XTCC is terminated.
Help
Opens a window with a help text.
To Next Page
Loading...
Need help?
General