Fujitsu Siemens Computers pmn - Physical Volume Operations; Physical Volume Operations Show Physical Volumes

U41117-J-Z125-7-76 215
GXCC Function bar
6.2.9.11 Physical Volume Operations
This submenu offers the following functions:
– Show Physical Volumes
– Link/Unlink Volume Groups
– Add Physical Volumes
– Erase Physical Volumes
– Reorganize Physical Volumes
These menu items are offered only if the PLM is running.
6.2.9.12 Physical Volume Operations » Show Physical Volumes
An identical function is offered in the Global Status under “Statistics” (see page 257).
An intermediate menu makes it possible to identify the physical volume or volumes:
You must specify the volume ID either in full or not at all. The drop-down menus for the
specification of the volume group or library also contain the lines “all-data” and “all-
cleaning”. If you specify “all”, this means that the group or library assignment is of no impor-
tance for the selection of the volumes that are to be displayed.
i