U41117-J-Z125-7-76 571
Appendix Transferring volumes
12.3.7 Library commands
12.3.7.1 ADIC library with DAS server
Further information is provided in the DAS manual.
12.3.7.2 StorageTek Library with ACSLS server
Further information is provided in the ACSLS manuals.
12.3.7.3 Fujitsu Library with LMF server (PLP)
Further information is available in the following PLP manuals:
– FUJITSU LMF SERVER/CLIENT USER'S GUIDE
– ETERNUS LT270 TAPE LIBRARY UNIT INSTALLATION INSTRUCTIONS
– ETERNUS LT270 Tape Library User's Guide
– ETERNUS LT270 Setup Guide
– ETERNUS LT270 Tape Library Maintenance Guide
ejects cartridges from the AML
[via the eject area]
dasadmin eject2 [-c] [-t media-type]
volserrange area
inserts [normal data] cartridges
[via the insert area] in the AML
dasadmin insert2 -n area
Eject volumes [of a cartridge pool]
from the library
eject cap_id vol_id | volrange ...
Make manual mode CAP ready to
enter labelled carts [into a
cartridge pool]
enter cap_id
Eject volume to MailSlot /opt/FJSVlmf/bin/lmeject <volume_name>
(on LMF server)
Enter volume from MailSlot /opt/FJSVlmf/bin/lmenter
(on LMF server)
To Next Page
Loading...
Need help?
General