58 U41117-J-Z125-7-76
Optional system functions CentricStor - Virtual Tape Library
2.9.8.5 Presentation of the mirror function in GXCC
In GXCC the mirror functions of a double RAID system are indicated by two arrows.
Example
Figure 25: Presentation of the mirror function in GXCC
Genuine RAID pairs are indicated with a white dot, potential pairs by a thicker black line
between the boxes on the right-hand side
The display can contain an odd number of RAID systems if, for example, a defective
RAID system has been separated from the CentricStor system. Further information
on this is provided in the section “RAID symbol for mirror mode” on page 131.
i
To Next Page
Loading...